Lots, serials and quality inspection

Traceability from supplier to customer, and blocking bad material.

Baca dalam Bahasa Indonesia

On this page
  1. Lot tracking
  2. Serial tracking
  3. Quality inspection
  4. In Voltrus
  5. Checklist

When a customer calls to say a batch of your product is faulty, two questions follow immediately: which raw material went into it, and who else received goods from the same batch? With a spreadsheet, answering takes days of digging through delivery notes. With lot tracking in an ERP, it is a query.

This article covers the three tools that protect quality and traceability: lot numbers, serial numbers and quality inspection.

Lot tracking

A lot (or batch, nomor batch) is a quantity produced or received together under the same conditions: one supplier delivery, one production run, one mixing batch. Everything in a lot is assumed to share the same quality, so if one unit is bad, the whole lot is suspect.

Lot tracking makes sense when:

  • regulation requires it (food, cosmetics, pharmaceuticals, chemicals, medical devices);
  • material has an expiry date;
  • quality varies between batches (paint tint, steel heat, fabric dye lot);
  • customers ask for certificates of analysis per batch.

When an item's tracking is lot, every movement in or out records the lot number, and receipts can record an expiry date. Stock on hand is then known per lot. On a purchase order, the Receive goods dialog asks for the lot number and expiry of each tracked line, so the warehouse records them at the dock rather than on paper.

FEFO: first expired, first out

For items with an expiry date, the right picking rule is FEFO: ship or consume the lot that expires soonest, regardless of when it arrived. Voltrus suggests the FEFO lot for an item (earliest expiry first; lots without an expiry come last). Picking the suggested lot is how you avoid writing off expired stock at year end.

Recall

Because each outbound movement carries its lot, Voltrus can list which documents (shipments, work order issues) carried a given lot: the starting point of a recall. Goods that come back follow the same rule: a customer return records the lots or serial numbers received back on its numbered RET document, so a recalled lot can be traced in both directions. Today the lot list and the recall query are available through the API and AI agents, not yet as a console screen.

Serial tracking

A serial number identifies one single unit: a machine, a motor, a laptop. Serial tracking is for items that are sold with a warranty, serviced individually, or valuable enough to follow one by one.

When an item's tracking is serial, every movement moves exactly one unit per serial number. The Receive goods dialog takes one serial per unit received. You can then say which serial was received from which supplier, where it sits now and which customer it was shipped to. Under FIFO costing, each serial carries its own cost (specific identification), which is what PSAK 202 (formerly PSAK 14) asks for items that are not interchangeable.

Quality inspection

An ERP enforces quality by holding stock until someone with the authority releases it. Voltrus does this with quality plans and inspections.

Quality plans

A quality plan says what to inspect and when:

FieldMeaning
ItemOne item, or all items
Inspection pointreceipt, production or shipment
ChecklistThe test steps (yes/no, measurements, notes)
Hold warehouseWhere stock waits until it is decided (usually a quarantine warehouse)

How a hold works

At receipt or production, goods covered by a plan do not go to the normal warehouse. They land in the hold warehouse, and a pending inspection is opened. Because quarantine warehouses are not nettable, the stock is valued on the balance sheet but cannot be picked, consumed or promised.

The inspector runs the checklist and decides:

  • Passed: the accepted quantity moves from hold to its destination warehouse.
  • Failed or partly rejected: the rejected quantity is either scrapped (with a write-off journal) or moved to a reject warehouse, for example to return to the supplier.

A split decision is normal: of 1,000 units received, 980 accepted and 20 rejected.

At shipment, the plan works the other way: the sales order cannot ship until a passed inspection covers the quantity. Shipment inspections are created by hand against the sales order.

Example: incoming inspection

A food producer receives 500 kg of sugar, lot SG-2611-07, expiry 30 Nov 2027. The quality plan for sugar holds it in QC-HOLD and asks for moisture and colour checks. The lab passes 500 kg. The inspection moves the full lot to MAIN, where production can consume it, and the lot number follows it into every work order that uses it.

If the moisture test failed, the lot would stay out of MRP and production, and purchasing would return it with a supplier return (see Freight, landed cost and supplier returns).

In Voltrus

Checklist

  • Decide per item: no tracking, lot, or serial. Lot for anything with expiry or batch variation.
  • Record expiry dates on receipt and pick by the FEFO suggestion.
  • Create a quarantine warehouse and quality plans for critical items and new suppliers.
  • Write inspection checklists with measurable steps, not "looks OK".
  • Run a mock recall once a year: pick a lot and trace it to every customer.

Run it in Voltrus ERP

Everything in these guides is built in: documents that post to the ledger as they happen, Indonesian tax, MRP and costing, with AI agents that propose and people who approve.

See Voltrus ERP