Support
Getting help with MC & FINS Explorer
Frequently Asked Questions
Where do I download it, and how do I unlock Pro?
Download the free DMG from dl-mc-fins-explorer.voltrus.id. Pro is a one-time licence key from the product page: enter it in Info, then Activate. To move it to another Mac, activate it there and choose "Move licence here".
My Mitsubishi PLC does not answer.
MC protocol must be opened for the port in GX Works2 (Open Setting) or GX Works3 (SLMP connection in the module parameters). The client's port number, TCP or UDP, and binary or ASCII must all match those settings. Write the parameters and reset the CPU after changing them. FX3U Ethernet adapters speak only the older 1E frame, which is not supported yet.
My Omron PLC does not answer.
Check that DA1 is the PLC's FINS node number (usually the last octet of its IP address) and that SA1 is a node number no other device uses. FINS uses port 9600. On NJ and NX controllers, FINS must be enabled and the variables you read must be mapped to a memory area.
Is it safe to use on a running machine?
Reading values does not change anything in the PLC. Writes and remote RUN/STOP do. Test them against the built-in simulator or an idle PLC first, and never write to a machine in operation unless you know what each address does.
I need a PLC or connection type that is not listed.
Email us the PLC model, the Ethernet module or adapter, and what you want to do with it. Requests decide what comes after the first release.
Contact Support
For questions, PLC reports and feature requests.
[email protected]Please include:
- The PLC model and Ethernet module, and its firmware version if you know it
- The protocol settings: frame, binary or ASCII, TCP or UDP, port, FINS node numbers
- The comm log export, or the end code you see
- Steps to reproduce the issue
Response Time
We reply within two business days.
Mitsubishi Electric, MELSEC, iQ-R, iQ-F and SLMP are trademarks of Mitsubishi Electric Corporation. Omron, SYSMAC and FINS are trademarks of OMRON Corporation. MC & FINS Explorer is not affiliated with or endorsed by either company.